If these tips are not helpful you can install a technical solution to strengthen the Wi-Fi signal.
The operators also offer such solutions (sometimes for free): therefore you can ask your operator for information about this.
There are various technical options:
You may still have an older modem. Consult with your operator if it would be useful to have it replaced by a more recent model.
Newer types also support Multiple-Input Multiple-Output (MIMO), for instance. This wireless technology uses multiple transmitters and receivers to transfer more data simultaneously. This technology will not only considerably increase the speed, but also benefit the range and robustness of the connection in multipath surroundings. In radio communications a multipath refers to the phenomenon resulting in radio signals reaching the antenna through two or more paths. A multipath can be caused by reflection of the signal through reflective surfaces (metal partitions, buildings, water surfaces, ...).
This device retransmits the Wi-Fi signal to extend the range.
The installation is very simple: all you have to do is plug in the repeater at a location where the modem’s Wi-Fi signal is still strong enough to be retransmitted. However, if the retransmitted signal is of inferior quality (too much interference or too weak for instance) at the location of the repeater, using a repeater will not produce a good result either. If the repeater does not deliver the desired result, place it a little closer to the modem. In older repeater models the available speed is halved for devices connected to the repeater.
In case of mesh systems a single main router is connected to your modem. This main router forwards the signal to the accompanying modules or “satellites” (minimum of 2). The Wi-Fi signal is communicated among all those modules to form a single Wi-Fi network.
This solution is ideal for locations where there is no Ethernet cable and the Wi-Fi signal is not strong enough. You only need a cable that connects your modem to the main satellite. Next you place the other modules where you want a better range and the system will configure itself.
A “Wi-Fi hotspot” or access point is an additional wireless access point to connect equipment to the Wi-Fi, at a location where your modem’s Wi-Fi coverage is insufficient. The access point is connected to the modem by means of a network cable or through a PLC adapter (“powerline”, “powerline homeplugs”). This results in optimum speed and a stable signal.
In the case of PLC adapters there are models with a built-in Wi-Fi access point. At least 2 are needed: one to plug in near your modem and a second one to plug in where you want to extend the range of the Wi-Fi signal. Combined they ensure that the Internet signal is sent from A to B. Unfortunately it may happen that the signal does not optimally reach the second powerline adapter, thus lowering the speed. There is no guarantee that you will always reach the highest speed.