Consumers: 451 results found Export XML

Search results

Advanced search

  • Decision of 22 November 2022 regarding the analysis of tariff increases for bpost's single-piece rates for the year 2023
    Publications › Decision -
    This monitoring takes place in accordance with Article 18 of the Act of 26 January 2018.

  • 16.8% increase of the non-prior stamp in 2023
    Publications › Press release -
    This increase will bring the non-prior stamp to a piece rate of 1.39 euro in 2023.

  • The BIPT extends its tariff simulator to microenterprises and the self-employed
    Publications › Press release -
    The self-employed and 'SMEs can also use besttariff.be to access a telecommunications tariff tailored to their real needs.

  • The BIPT publishes a study on the sustainability of the telecom networks in Belgium.
    Publications › Press release -
    A study commissioned by the BIPT shows that sustainability is a major theme for the Belgian telecom operators. During the 2018-2021 period their energy consumption dropped by 11% and the CO2 emissions by 38%.

  • The BIPT publishes a study on data centres and digital content providers in Belgium
    Publications › Press release -
    In order to get a better overview of the Belgian players in the field of data centres and digital content providers, the BIPT conducted a study analysing the commercial developments on the market and making an inventory of the services offered. Security and sustainability were also examined.

  • Communication of 17 November 2022 concerning the study regarding data centres and digital content providers in Belgium
    Publications › Communication -
    The BIPT has commissioned a study regarding data centres and digital content providers in Belgium. The study analyses the commercial developments on the market and makes an inventory of the services offered there. In addition the way in which security and sustainability are dealt with, was examined.

  • Save up to €240 per year by comparing telecoms tariffs
    Publications › Press release -
    Due to the current high inflation rates, consumers are paying more attention to their budgets. Moreover, some operators also reflect the rising inflation in their prices. Therefore, regularly comparing tariffs in a far from uniform telecommunications market is more useful than ever to save money, regardless of the household budget. Several telecommunications offers have recently adjusted the amount of data included. Carrying out a tariff comparison helps consumers see which services best suit their real needs. The latest national price comparison study of the BIPT shows that this approach pays off.

  • Results of the benchmarking of the telecommunications service rates in Belgium [Tariffs applied in Q3 2022]
    Publications › Communication -
    Carrying out a tariff comparison helps consumers see which services best suit their real needs.

  • Communication of 30 August 2022 on the use of analogue/digital channels to ensure implementation of the VHF Data Exchange System (VDES) in the programming of marine VHF radiotelephones
    Publications › Communication -
    This communication replaces the communication of 24 May 2018 in order to comply with the CEPT regulation (ECC Decision (19)03 — Harmonised usage of the channels of the Radio Regulations Appendix 18 (transmitting frequencies in the VHF maritime mobile band), which provides for a “cleaning period” to ensure the end of analogue voice telephony on those channels.
  • FAQ

    If these tips are not helpful you can install a technical solution to strengthen the Wi-Fi signal.

    The operators also offer such solutions (sometimes for free): therefore you can ask your operator for information about this.

    There are various technical options:

    Replace the modem

    You may still have an older modem. Consult with your operator if it would be useful to have it replaced by a more recent model.

    Newer types also support Multiple-Input Multiple-Output (MIMO), for instance. This wireless technology uses multiple transmitters and receivers to transfer more data simultaneously. This technology will not only considerably increase the speed, but also benefit the range and robustness of the connection in multipath surroundings. In radio communications a multipath refers to the phenomenon resulting in radio signals reaching the antenna through two or more paths. A multipath can be caused by reflection of the signal through reflective surfaces (metal partitions, buildings, water surfaces, ...).  

    Install a Wi-Fi repeater

    This device retransmits the Wi-Fi signal to extend the range.

    The installation is very simple: all you have to do is plug in the repeater at a location where the modem’s Wi-Fi signal is still strong enough to be retransmitted. However, if the retransmitted signal is of inferior quality (too much interference or too weak for instance) at the location of the repeater, using a repeater will not produce a good result either. If the repeater does not deliver the desired result, place it a little closer to the modem. 
    In older repeater models the available speed is halved for devices connected to the repeater. 

    Set up a Wi-Fi mesh network

    In case of mesh systems a single main router is connected to your modem. This main router forwards the signal to the accompanying modules or “satellites” (minimum of 2). The Wi-Fi signal is communicated among all those modules to form a single Wi-Fi network. 

    This solution is ideal for locations where there is no Ethernet cable and the Wi-Fi signal is not strong enough. You only need a cable that connects your modem to the main satellite. Next you place the other modules where you want a better range and the system will configure itself.

    Install an extra access point

    A “Wi-Fi hotspot” or access point is an additional wireless access point to connect equipment to the Wi-Fi, at a location where your modem’s Wi-Fi coverage is insufficient. The access point is connected to the modem by means of a network cable or through a PLC adapter (“powerline”, “powerline homeplugs”). This results in optimum speed and a stable signal.

    In the case of PLC adapters  there are models with a built-in Wi-Fi access point.  At least 2 are needed: one to plug in near your modem and a second one to plug in where you want to extend the range of the Wi-Fi signal. Combined they ensure that the Internet signal is sent from A to B. Unfortunately it may happen that the signal does not optimally reach the second powerline adapter, thus lowering the speed. There is no guarantee that you will always reach the highest speed.

    Caution: Other ways, such as amplifying the Wi-Fi signal through either an external repeater or by replacing the router’s antenna, are prohibited.

Back to top